 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AWS5533 0.5 to 2.5 GHz SP3T Switch ADVANCED PRODUCT INFORMATION - Rev 0.3 FEATURES * * * * * Low Insertion Loss: 0.7 dB at 2 GHz High Isolation: >25 dB Low Control Voltage Operation: to +2.5 V Low Harmonic Levels Low Profile Surface Mount Package APPLICATIONS * CDMA Wireless Handsets S26 Package 12 Pin 3mm x 3mm MLF PRODUCT DESCRIPTION The AWS5533 is a single pole, three throw (SP3T) RF switch developed for CDMA systems. Manufactured in ANADIGICS's state-of-the-art pHEMT process, the device uses patent-pending circuit topologies to provide low insertion loss, high port-toport isolation, and high linearity needed to enhance the performance of CDMA radios. The AWS5533 is offered in a 12-lead 3 mm x 3 mm MLF package. NC 12 (Ant.) RFC 11 NC 10 V1 1 9 V3 RF1 2 8 RF3 GND 3 7 GND 4 5 6 GND RF2 02/2003 V2 Figure 1: Block Diagram AWS5533 NC 12 RFC 11 NC 10 V1 RF1 GND 1 2 3 9 8 7 V3 RF3 GND 4 GND 5 RF2 6 V2 Figure 2: Pinout (X-ray Top View) Table 1: Pin Description PIN 1 2 3 4 5 6 7 8 9 10 11 12 NAME V1 RF1 GND GND RF2 V2 GND RF3 V3 NC RFC NC DESCRIPTION Control Voltage, RF Path 1 RF Port, Path 1 Ground Ground RF Port, Path 2 Control Voltage, RF Path 2 Ground RF Port, Path 3 Control Voltage, RF Path 3 No Connection (1) RF Common Port No Connection (1) Notes: (1) Pins 10 and 12 are not connected in the package. Recommend pins be grounded, but is not necessary. 2 ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 AWS5533 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER Control Voltages (V1, V2, V3) RF Input Power (PIN) (1) Storage Temperature (TSTG) MIN -65 MAX +10.0 10 +150 UNIT V W C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Notes: (1) at RF1, RF2, RF3, and RFC Table 3: Operating Ranges PARAMETER RF Frequency (f) Control Voltages (V1, V2, V3) Ambient Temperature (TA) MIN 0.5 -0.2 +2.5 -30 TYP MAX 2.5 +0.2 +5 +85 UNIT GHz V o COMMENTS RF path OFF state RF path ON state C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Table 4: ESD Ratings PARAMETER ESD Threshold Voltage (All Pins) ESD Threshold Voltage (Supply pins only) ESD Threshold Voltage (Supply-Signal pins) ESD Threshold Voltage (RF Signal pins only) ESD Threshold Voltage (Antenna Common Port) METHOD CDM (1) HBM (3) HBM HBM HBM (5) RATING 1000 400 (2) UNIT V V V V (4) 400 450 12000 (6) V Notes: (1) Tested in conformance with JEDEC specification JESD22-C101-A (2) A CDM ESD threshold of this voltage classifies the device as a Class IV component per JEDEC JESD22-C101-A (3) Tested in conformance with ESD/EOS Society specification STM5.1-2001 (4) A HBM ESD threshold at these voltages classifies the device as a Class 1A component per ESD/EOS Society Specification STM5.1-2001 (5) This test was done in conformance with ESD/EOS Society HBM specification STM5.1-2001. 3000 ESD strikes were applied using multiple groups of 100 strikes each where the interval between strikes within a group is 1 second and the interval between groups is 30 seconds. (6) This voltage rating REQUIRES the use of an inductor as an RF choke as defined in Note #3 in the application circuit information. This rating has been tested with inductor values of 47nH and 100nH. ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 3 AWS5533 Table 5: Electrical Specifications (TA = +25 OC, RF ports terminated with 50 , Vn = +2.7 V and is the Control Voltage for the ON path, RFCRFn; VX = 0 V and is the Control Voltage for the other two OFF paths, RFC-RFx) PARAMETER Insertion Loss 1 GHz 2 GHz Return Loss 1 GHz 2 GHz Isolation 1 GHz 2 GHz Input Third Order Intercept 800 MHz Cellular Band 1900 MHz PCS Band Cross-Modulation (3) 800 MHz Cellular Band 1900 MHz PCS Band 2nd Harmonic Rejection 837 MHz 1880 MHz 3rd Harmonic Rejection 837 MHz 1880 MHz Current Consumption (2) (1) MIN 25 25 - TYP 0.45 0.7 -22 -16 28 27 +66 +58 -105 -105 -86 -80 -80 -82 - MAX 0.6 0.8 -20 -15 30 UNIT dB COMMENTS RFC port to selected RFn port RFC port and selected RFn port dB RFC port to isolated RFx ports dB RFC port to selected RFn port dB m RFC port to selected RFn port dB m RFC port to selected RFn port PIN = +25.5 dBm PIN = +24 dBm RFC port to selected RFn port PIN = +25.5 dBm PIN = +24 dBm each Vn port dB c dB c A Notes: (1) Isolated RFx ports have a return loss of approximately -3 dB. (2) For the Cellular Band, two tones with PIN = +22.5 dBm each, at 837 and 838 MHz. For the PCS Band, two tones with PIN = +21 dBm each, at 1880 and 1881 MHz. (3) For the Cellular Band, one CW interferer at 881.5 MHz with -23 dBm power, and one modulated transmit signal at 849 MHz with +25.5 dBm power. For the PCS Band, one CW interferer at 1960 MHz with -23 dBm power, and one modulated transmit signal at 1910 MHz with +24 dBm power. Table 6: Switch Control Truth Table CONTROL VOLTAGE V1 +2.5 to +5 V -0.2 to +0.2 V -0.2 to +0.2 V V2 -0.2 to +0.2 V +2.5 to +5 V -0.2 to +0.2 V V3 -0.2 to +0.2 V -0.2 to +0.2 V +2.5 to +5 V RF PATH SELECTION R FC - R F1 ON OFF OFF R FC - R F2 OFF ON OFF R FC - R F3 OFF OFF ON 4 ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 AWS5533 PERFORMANCE DATA Figure 3: Insertion Loss vs. Frequency (ON path,Vn = +2.7 V, VX = 0 V) 0.0 -50 2nd Harmonic 3rd Harmonic Figure 4: Harmonics of Cellular Band vs. Control Voltage,Vn, (f = 837 MHz, PIN = +25.5 dBm) -0.2 -60 -0.4 Harmonic Level (dBc) 1000 1500 2000 2500 Insertion Loss (dB) -70 -0.6 -80 -0.8 -90 -1.0 500 -100 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 Frequency (MHz) Control Voltage (V) Figure 5: Return Loss vs. Frequency (ON path,Vn = +2.7 V, VX = 0 V) 0 RFC port RFn port -10 Figure 6: Harmonics of PCS Band vs. Control Voltage, Vn, (f = 1880 MHz, PIN = +24 dBm) -50 2nd Harmonic 3rd Harmonic -60 Harmonic Level (dBc) 1000 1500 2000 2500 Return Loss (dB) -70 -20 -80 -30 -90 -40 500 -100 2.5 2.6 2.7 2.8 2.9 3 3.1 3.2 3.3 3.4 3.5 Frequency (MHz) Control Voltage (V) Figure 7: Isolation vs. Frequency (OFF path,Vn = +2.7 V, VX = 0 V) 0 -10 Isolation (dB) -20 -30 -40 500 1000 1500 2000 2500 Frequency (MHz) ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 5 AWS5533 APPLICATION INFORMATION Circuit Applications External component requirements for the AWS5533 are shown in Figure 8. Application details are listed in the following notes: 1. Cb are DC blocking capacitors external to the device. A value of 100 pF is sufficient for operation to 500 MHz. The values may be tailored to provide specific electrical responses. 2. The RF Ground connections should be kept as short as possible and tied directly to a good RF ground for best broadband performance. 3. LESD provides a means to increase the ESD protection on a specific RF port, typically the port attached to the antenna. By using LESD as an RF choke on an RF port, an ESD protection to 12 kV contact discharge has been demonstrated. Common (Ant.) RF Port Note 3 LESD Cb NC 12 RFC 11 NC 10 Control Pin, RF Path 1 Cb RF Port 1 RF Gnd V1 1 9 V3 Control Pin, RF Path 3 Cb RF Port 3 RF1 2 8 RF3 3 7 RF Gnd 4 5 6 RF2 Keep RF Gnd Connection Short 3 Places, Note 2 RF Gnd Cb Control Pin, RF Path 2 RF Port 2 Figure 8: Application Schematic 6 ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 V2 AWS5533 PACKAGE OUTLINE Figure 9: S26 Package Outline - 12 Pin 3mm x 3mm MLF ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 7 AWS5533 COMPONENT PACKAGING Figure 10: Tape & Reel Packaging Square Module / MLF User Direction of Feed Figure 11: Tape & Reel Package Orientation Table 7: Tape & Reel Dimensions PACKAGE TYPE 3mm X 3mm TAPE WIDTH 12mm POCKET PITCH 8mm REEL CAPACITY 1000 MAX REEL DIA 7" 8 ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 AWS5533 NOTES ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 9 AWS5533 NOTES 10 ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 AWS5533 NOTES ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 11 AWS5533 ORDERING INFORMATION ORDER NUMBER AWS5533S26 TEMPERATURE RANGE -30 oC to +85 oC PACKAGE DESCRIPTION 12 Pin 3mm x 3mm MLF COMPONENT PACKAGING Tape and Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 12 ADVANCED PRODUCT INFORMATION - Rev 0.3 02/2003 |
Price & Availability of AWS5533
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |